Online-Hilfe
This page is only available in English

Produkte

    Seiten

        We have reduced pricing on several of our product lines. Learn more
        Master photo:HD-MD4X2-4K-E
        Add to Favorites

        HD-MD4X2-4K-E

        4x2 4K HDMI® Switcher

        Discontinued

        A high-performance, surface-mountable 4K/60 signal switcher with four HDMI® inputs and two HDMI outputs, 4x2 matrix switching, advanced EDID management, QuickSwitch HD® technology, and native Crestron® control via Ethernet.

        Have a question?
        Add to a Project
        Find a Dealer

        The Crestron® HD-MD4X2-4K-E is a simple to use, ultra high-definition signal switcher with four HDMI® inputs and two HDMI outputs. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. Operation is enabled using the onboard controls, a Web browser, or a Crestron control system. Simplified setup is facilitated through the front panel OLED display or a Web browser.

        4K Ultra HD

        4K video support provided by the HD‑MD4X2‑4K‑E is essential for use with the latest generation of UHD and 4K DCI displays and sources, as well as computers and monitors with native resolutions beyond 1080p and WUXGA.

        QuickSwitch HD® Technology

        Digital media signals are typically encrypted to protect against unauthorized viewing. After authenticating displays or signal processors, a source device must issue a key before delivering an output signal. Crestron QuickSwitch HD technology manages these keys to ensure fast, reliable switching and immunity to display blackouts caused by key authentication.

        NOTE: QuickSwitch HD technology requires the use of a scaling HDMI output which is available on DigitalMedia devices such as the DM‑RMC‑4KZ‑SCALER‑C and DMC‑4KZ‑HDO.

        EDID Format Management

        To ensure that every source gets displayed at its optimal resolution and format, the HD‑MD4X2‑4K‑E provides comprehensive management of EDID (Extended Display Identification Data) information. For applications requiring custom configuration, the HD‑MD4X2‑4K‑E allows for easy assessment of each device’s format and resolution capabilities with the ability to configure signals appropriately.

        Low-Profile Installation

        The HD-MD4X2-4K-E mounts conveniently to a wall or other flat surface. At just over one inch deep, it can fit easily behind a flat panel display or under a table. It can also be placed on a rack shelf, or attached to a single rack rail.

         
        Key Features
        • 4x2 ultra high-definition 4K/60 digital AV switcher
        • For standalone use, or as part of a fully integrated Crestron® system
        • Fully operable using onboard controls, a Web browser, or a Crestron control system
        • Simplified setup through the front panel OLED display or Web browser
        • Four HDMI® inputs and two independent HDMI outputs
        • DVI and DisplayPort Multimode compatible [1]
        • QuickSwitch HD® technology manages HDCP keys for fast, reliable switching
        • Comprehensive built-in EDID configuration tools
        • Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
        • High-speed Ethernet LAN connection
        • Compact, low-profile surface mount design
        • Universal 100-240V external power pack included
        1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, and QuickSwitch HD are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        CrestronHome 4K
        Features
          4x2 digital AV switcher, QuickSwitch HD® technology, local or Web browser setup and control, Crestron® controllable
        Video
          Input Signal Types HDMI® w/Deep Color, 3D, & 4K (DVI & DisplayPort Multimode compatible [1])
          Output Signal Types HDMI w/Deep Color, 3D, & 4K (DVI compatible [1])
          Maximum Resolutions
          Scan Type Resolution Frame Rate Color Sampling Color Depth
          Progressive 4096x2160 4K DCI
         
        &
         
        3840x2160 Ultra HD        		 24 Hz 4:4:4 30 bit
          30 Hz 4:4:4 24 bit
          30 Hz 4:2:2 36 bit
          60 Hz 4:2:0 24 bit
          2560x1600 WQXGA 60 Hz 4:4:4 36 bit
          1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
          Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
          NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
        Audio
          Input Signal Types HDMI (DisplayPort Multimode compatible [1])
          Output Signal Types HDMI
          Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels [6]
        Communications
          Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Web browser setup and control, Crestron control system integration
          USB For factory use only
          HDMI HDCP, EDID
          NOTE: Supports management of EDID
        Connectors
          INPUT 1 – 4 (4) 19-pin Type A HDMI female;
        HDMI digital video/audio inputs;
        Also supports DVI and DisplayPort Multimode [1]
          OUTPUT 1 – 2 (2) 19-pin Type A HDMI female;
        HDMI digital video/audio outputs;
        Also supports DVI [1]
          LAN (1) 8-wire RJ45 female;
        10Base-T/100Base-TX Ethernet port
          24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input;
        PW-2407WU power pack included
          SERVICE (1) USB Type A female;
        For factory use only
        Display
          Display Type 2x20 character alphanumeric OLED
          Functions Displays setup and configuration menus, signal information, customizable input names
        Controls & Indicators
          MENU (1) pushbutton, opens the setup menu
          Λ, V, <, > (4) pushbuttons, for menu navigation and parameter adjustment
          Enter (1) pushbutton, applies a change
          BACK (1) pushbutton, steps menu back one level
          EXIT (1) pushbutton, exits the menu
          PWR (1) bicolor green/amber LED, indicates operating power supplied from power pack, turns amber while booting and green when operating
          INPUT 1 – 4 (4) pushbuttons for input selection, and (4) bicolor green/amber LEDs to indicate which input is currently routed or pending output selection, and signal presence at each corresponding input
          OUTPUT 1 – 2 (2) pushbuttons for output selection, and (2) bicolor green/amber LEDs to indicate sink detection and signal presence at each corresponding HDMI output
          LAN (2) LEDs, amber LED indicates Ethernet activity, green LED indicates Ethernet link status
        Power Requirements
          Power Pack 0.75 Amps @ 24 Volts DC;
        100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Chassis Metal, black finish, with (2) integral mounting flanges
          Mounting Freestanding, surface mount, or attach to a single rack rail
        Dimensions
          Height 4.08 in (104 mm)
          Width 8.68 in (221 mm)
          Depth 1.08 in (28 mm)
        Weight
          1.35 lb (0.62 kg)
        Click here to search product certificates.
        1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, and QuickSwitch HD are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.
        Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink