| Operating System |
| Crestron 3‑Series®; real‑time, preemptive, multi‑threaded/multitasking kernel; Transaction‑Safe Extended FAT file system; supports up to 10 simultaneously running programs; preloaded DMPS3 .AV Framework Base Program |
| Memory |
| SDRAM |
512 MB |
| Flash |
4 GB |
| Communications |
| Ethernet |
100/1000 Mbps, auto‑switching, auto‑negotiating, autodiscovery, full/half duplex, industry‑standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140‑2 compliant encryption, IEEE 802.1X, SNMP, BACnet™ connectivity and IP10, IPv4 or IPv6, Active Directory® authentication, IIS v.6.0 Web Server, SMTP e‑mail client, RSTP, Private Network Mode |
| Control Subnet |
100/1000 Mbps Ethernet, auto‑switching, autonegotiating, auto‑discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode, IEEE 802.3at Type 1 compliant PoE PSE |
| AirMedia1 |
(Via Ethernet) 100 Mbps, IPv4, DHCP, TLS, AES, mDNS, HTTPS web server |
| Streaming |
(Via Ethernet) 100 Mbps, DHCP, H.264 decoding, MJPEG decoding, HDCP 2.2, RTP, RTSP, SDP |
| Cresnet |
Cresnet master mode |
| USB |
USB signal routing via select DM transmitters and receivers, or via USB‑EXT‑DM series extenders9; USB device port for computer console (setup) |
| RS‑232 |
2‑way device control and monitoring up to 115.2k baud with hardware and software handshaking |
| IR/Serial |
1‑way device control via infrared up to 1.2 MHz or serial TTL/ RS‑232 (0‑5V) up to 115.2k baud |
| DigitalMedia |
DM 8G+, HDCP 2.2, EDID, CEC, PoDM+8, Ethernet |
| HDBaseT |
HDCP 2.2, EDID, CEC, RS‑232, PoE+8, Ethernet |
| HDMI® |
HDCP 2.2, EDID, CEC |
|
|
| Video |
| Switcher |
8x2 matrix, Crestron QuickSwitch HD technology |
| Scaler (HDMI output) |
(1) 4K video scaler with motion‑adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion6, content‑adaptive noise reduction, and widescreen format selection (zoom, stretch, maintain aspect‑ratio, or 1:1) |
| Input Signal Types |
HDMI w/Deep Color, 3D6, & 4K (DVI & Dual‑Mode DisplayPort compatible5) on Inputs 1‑6;
DM 8G+ & HDBaseT w/Deep Color, 3D6, & 4K on Input 7;
Streaming & AirMedia on Input 8 (LAN) |
| Output Signal Types |
HDMI w/Deep Color & 4K (DVI compatible5) on Output 1;
DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K on Output 2 |
| Maximum Resolutions |
| Progressive |
4096x2160 DCI 4K & 3840x2160 4K UHD |
24 Hz |
4:4:4 |
30 bit |
| 30 Hz |
4:4:4 |
24 bit |
| 30 Hz |
4:2:2 |
36 bit |
| 60 Hz |
4:2:0 |
24 bit |
| 2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
| 1920x1080 HD1080p |
60 Hz |
4:4:4 |
36 bit |
Interlaced
(excluded on HDMI output) |
1920x1080 HD1080i |
30 Hz |
4:4:4 |
36 bit |
|
|
|
| Streaming Decoder |
| Video Formats |
H.264 (MPEG‑4 part 10 AVC), MJPEG |
| Audio Format |
AAC stereo |
| Bitrates |
Up to 25 Mbps |
| Resolutions |
Up to 1080p60 |
| AirMedia 1 |
| Users |
Supports up to 32 users (presentation device connections) |
| Client Software OS Support |
Windows 7, Windows 8, Windows 10, Mac® OS X® (versions 10.10 through 10.13) |
| Client Software Video Frame Rate |
30 fps |
| Mobile App OS Support |
Apple® iOS®, Android |
| Full Screen Device Mirroring |
Shares the screen image and audio from an Apple iOS, Android, Mac OS X, or Windows device |
| Resolutions |
800x600@60 Hz, 1024x768@60 Hz, 1280x720@60 Hz, 1280x768@60 Hz, 1280x800@60 Hz, 1280x1024@60 Hz, 1360x768@60 Hz, 1400x1050@60 Hz, 1440x900@60 Hz, 1600x1200@60 Hz, 1920x1080@60 Hz, 1920x1200@60 Hz |
| Audio Format |
Stereo |
| Audio – General |
| Switcher/Mixer |
13x5 stereo source matrix switcher, digital & analog source inputs, streaming & AirMedia source input, 6‑channel gated mic mixer w/DSP, independent mixer per analog output (6‑ch mic + 1 stereo source), independent stereo DSP per analog output, integrated power amplifier, two independent digital output mixers (6‑ch mic + 1 stereo source), 2x1 digital output mix selector per digital output |
| Analog‑To‑Digital Conversion |
24‑bit 48 kHz |
| Digital‑To‑Analog Conversion |
24‑bit 48 kHz |
| Frequency Response, Digital & Analog Line Outputs |
20 Hz to 20 kHz ±0.5 dB (digital source);
20 Hz to 20 kHz ±0.5 dB (analog line source);
20 Hz to 20 kHz ±0.7 dB (microphone source) |
| Frequency Response, Speaker Output |
20 Hz to 20 kHz ±1 dB @ 25 W into 8 Ω;
100 Hz to 20 kHz ±2.5 dB @ 70 or 100V |
| S/N Ratio, Digital & Analog Line Outputs |
>108 dB, 1 kHz, A‑weighted (digital source);
>103 dB, 1 kHz, A‑weighted (analog line source) |
| S/N Ratio, Speaker Output |
98 dB @ 25 W into 8 Ω, 1 kHz, A‑weighted;
96 dB @ 25 W into 4 Ω, 1 kHz, A‑weighted |
| THD+N, Digital & Analog Line Outputs |
<0.002%, 20 Hz to 20 kHz (digital source);
<0.005%, 20 Hz to 20 kHz (analog line source);
<0.05%, 20 Hz to 20 kHz (microphone source) |
| THD+N, Speaker Output |
<0.1%, 1 kHz @ 25 W into 4 or 8 Ω;
<0.7%, 20 Hz to 20 kHz @ 25 W into 4 or 8 Ω |
| Stereo Separation, Digital & Analog Line Outputs |
>108 dB (digital source);
>103 dB (analog source) |
| Stereo Separation, Speaker Output |
>65 dB @ 25 W, 1 kHz |
| Channel Separation, Digital Outputs |
>108 dB (digital source);
>103 dB (analog source) |
| Channel Separation, Analog Line Outputs |
>103 dB |
| Speaker Output Modes |
4 Ω/8 Ω stereo, 70V mono, or 100V mono |
| Speaker Amplifier Output Power |
25 W RMS per channel @ 4 or 8 Ω;
50 W RMS @ 70 or 100V |
| Audio – Microphone Inputs |
| Applies to 6 microphone input channels (Mic/Line 1 – 6): |
| Input Signal Types |
Mono analog mic or line level |
| Phantom Power |
Enable/Disable per channel |
| Gain |
0 to +60 dB gain adjustment in 3 dB increments, plus mute |
| Delay |
0.0 to 85.0 ms |
| EQ Center Frequencies |
50 to 200 Hz (Band 1), 200 to 800 Hz (Band 2), 800 to 3.2k Hz (Band 3), 3.2k to 12.8k Hz (Band 4) |
| EQ Gain |
±12.0 dB per band |
| High‑Pass Filter |
On or Off |
| Gating Threshold |
‑80 to 0 dB |
| Gating Depth (Attenuation) |
‑80 to 0 dB |
| Gating Attack |
1 to 250 ms |
| Gating Release |
1 to 1000 ms |
| Compression Threshold |
‑80 to 0 dB |
| Compression Ratio |
1:1 to 10:1 |
| Compression Attack |
1 to 250 ms |
| Compression Release |
1 to 1000 ms |
| Compression Curve |
Hard or soft knee |
| Audio – Source Inputs |
| Input Signal Types |
HDMI (Dual‑Mode DisplayPort compatible5) on Inputs 1‑6;
DM 8G+ & HDBaseT on Input 7;
Streaming & AirMedia on Input 8 (LAN);
Analog 2‑channel on Aud In 1‑5 |
| Analog Formats |
Stereo 2‑channel |
| Digital Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
| Input Compensation |
±10.0 dB, adjustable per input |
| Audio – Analog Line & Speaker Outputs |
| Applies to Program Out, Speaker Outputs, and Aux Out 1 – 2 |
| Output Signal Format |
Stereo |
| Mic 1 – 6 |
‑80 to +10 dB level adjustment range, plus mute and pan |
| Mic Master |
‑80 to +10 dB level adjustment range, plus mute |
| Source |
‑80 to +10 dB level adjustment range, plus mute and balance |
| Master Volume |
‑80 to +10 dB level adjustment range, plus mute and mono |
| Mixer Presets |
1 through 5 |
| Bass |
±12.0 dB |
| Treble |
±12.0 dB |
| Equalization |
10‑band graphic + 4‑band parametric |
| GEQ Center Frequencies |
31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, and 16k Hz |
| GEQ Gain |
±12.0 dB per band |
| PEQ Center Frequencies |
10 to 22000 Hz per band |
| PEQ Gain |
‑36.0 to +24.0 dB per band |
| PEQ Bandwidth |
0.02 to 3.50 octaves per band |
| PEQ Types |
Parametric, High Pass, Low Pass, High Shelf, Low Shelf, Notch |
| Delay |
0.0 to 85.0 ms |
| Limiter Threshold |
‑80 to 0 dB |
| Limiter Ratio |
1:1 to 10:1 |
| Limiter Attack |
1 to 250 ms |
| Limiter Hold |
1 to 200 ms |
| Limiter Release |
1 to 1000 ms |
| Limiter Curve |
Hard or soft knee |
| EQ Presets |
1 through 10 (includes Delay and Limiter settings) |
| Audio – Digital Outputs |
| Output Signal Types |
HDMI (DVI compatible5) on Output 1;
DM 8G+ & HDBaseT on Output 2 |
| Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
| Digital Output Mix Select 1 – 2 |
Selects which mix is routed to the corresponding output |
| Digital output mixer options (per mix): |
| Mic 1 – 6 |
‑80 to +10 dB level adjustment range, plus mute and pan |
| Mic Master |
‑80 to +10 dB level adjustment range, plus mute |
| Source |
‑80 to +10 dB level adjustment range, plus mute and balance |
| Master Volume |
‑80 to +10 dB level adjustment range, plus mute |
| Mixer Presets |
1 through 5 |
| Connectors – Audio/Video Inputs |
| AUD IN 1 – 5 |
(5) 5‑pin 3.5 mm detachable terminal blocks
Balanced/unbalanced stereo line‑level analog audio inputs;
Input Impedance: 24 kΩ balanced/unbalanced;
Maximum Input Level: 4Vrms balanced, 2Vrms unbalanced |
| MC1/LN1 – MC6/LN6 |
(6) 5‑pin 3.5 mm detachable terminal blocks;
Comprises (6) balanced microphone/line audio inputs;
Mic Input Level: ‑60 to 0 dBV, 1Vrms maximum;
Balanced Line Input Level: ‑31 to +11 dBV, 3.7Vrms maximum;
Unbalanced Line Input Level: ‑37 to +5 dBV, 1.85Vrms maximum;
Mic Input Impedance: 3.9 kΩ balanced;
Line Input Impedance: 19 kΩ balanced, 9.5 kΩ unbalanced;
Phantom Power: +48VDC, software enabled/disabled per channel |
HDMI 1 – 6
INPUTS |
(6) HDMI Type A connectors, female;
Digital video/audio inputs;
(DVI and Dual‑Mode DisplayPort compatible 5) |
| DM INPUT 7 |
(1) 8‑pin RJ45 connector, female, shielded;
DM 8G+ input, HDBaseT compliant;
PoDM+ PSE port (HDBaseT PoE+ compatible)8;
Connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM‑CBL‑8G, or Crestron DM‑CBL‑ULTRA cable7 |
| Connectors – Audio/Video Outputs |
| SPEAKER OUTPUT 4Ω/8Ω L – R |
(2) 2‑pin 7.62 mm 15A detachable terminal blocks;
4‑8 Ω stereo speaker‑level audio output;
Wire Size: Terminals accept up to 14 AWG (2.5 mm²);
Output Power: 25 W RMS per channel stereo at 4 or 8 Ω |
SPEAKER OUTPUT
70/100V |
(1) 2‑pin 7.62 mm 15A detachable terminal block;
Transformer‑isolated 70 or 100V mono speaker‑level audio output;
Wire Size: Terminals accept up to 14 AWG (2.5 mm²);
Output Power: 50 W RMS mono at 70 or 100V
NOTE: The 4Ω/8 Ω and 70/100V outputs are mutually exclusive
|
| PROG OUT |
(1) 5‑pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line‑level audio output;
Output Impedance: 200 Ω balanced, 100 Ω unbalanced;
Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced |
| AUX OUT 1 – 2 |
(2) 5‑pin 3.5 mm detachable terminal blocks;
Balanced/unbalanced stereo line‑level audio outputs;
Output Impedance: 200 Ω balanced, 100 Ω unbalanced;
Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced |
| HDMI 1 OUTPUTS |
(1) HDMI Type A connector, female;
Digital video/audio output;
(DVI compatible3) |
| DM OUTPUT 2 |
(1) 8‑pin RJ45 connector, female, shielded;
DM 8G+ output, HDBaseT compliant;
PoDM+ PSE port (HDBaseT PoE+ compatible)8;
Connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, DM‑CBL‑8G, or DM‑CBL‑ULTRA cable7 (sold separately) |
| Connectors – Networking, Control, & Power |
| IR/SERIAL OUT 1 – 4 |
(4) 2‑pin 3.5 mm detachable terminal blocks;
IR/Serial output ports;
IR output up to 1.2 MHz;
1‑way serial TTL/RS‑232 (0‑5V) up to 115.2k baud |
| IR IN |
(1) 3‑pin 3.5 mm detachable terminal block;
Allows control from IR wireless remotes using RC‑5 command set |
| INPUT 1 – 4 |
(1) 5‑pin 3.5 mm detachable terminal block;
Comprises (4) programmable digital inputs;
Input Voltage Range: 0 to 24VDC, referenced to GND;
Logic Threshold: 2.5VDC nominal with 1V hysteresis band;
Input Impedance: 10 kΩ at >5V, 1 MΩ at <5V;
Pull‑up Resistor: 2.2 kΩ per input |
| RELAY 1 – 4 |
(1) 8‑pin 3.5 mm detachable terminal block;
Comprises (4) normally open, isolated relays;
Rated 1A, 30VAC/VDC;
MOV arc suppression across contacts |
| COM A – B |
(2) DB9 connectors, male;
Bidirectional RS‑232 ports;
Up to 115.2k baud, hardware and software handshaking support |
| NET |
(4) 4‑pin 3.5 mm detachable terminal blocks;
Cresnet Master ports, paralleled;
Available Cresnet Power: 10 W |
| PoDM+ INPUT PWR |
(1) Combo D‑Sub 7w2 connector, male;
48VDC power input for PoDM power supply8;
Enables PoDM+ power sourcing on each DM INPUT/OUTPUT port;
Enables PoE power sourcing on the CONTROL SUBNET port |
| SERVICE |
(1) USB Type B connector, female;
For factory use only |
| 100‑240V~ 6.0A 50/60Hz |
(1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included |
| G |
(1) 6‑32 screw;
Chassis ground lug |
| CONTENT LAN IN 8 |
(1) 8‑pin RJ45 connector, female;
10Base‑T/100Base‑TX Ethernet port;
Provides a dedicated LAN connection for streaming input & AirMedia1 |
| CONTROL SUBNET |
(1) 8‑pin RJ45 connector, female;
10Base‑T/100Base‑TX/1000Base‑T Ethernet port;
PoE PSE (Power Sourcing Equipment) port8;
Provides a dedicated local network for Crestron devices |
| LAN |
(1) 8‑pin RJ45 connector, female;
10Base‑T/100Base‑TX/1000Base‑T Ethernet port |
| COMPUTER (front) |
(1) USB Type B connector, female;
USB computer console port (for setup only) |
| Controls & Indicators |
| PWR |
(1) Green LED, indicates operating power supplied from AC power line |
| NET |
(1) Yellow LED, indicates Cresnet bus activity |
| LAN |
(1) Yellow LED, indicates Ethernet activity |
| HW‑R |
(1) Recessed pushbutton for hardware reset, reboots the control system |
| SW‑R |
(1) Recessed pushbutton for software reset, restarts the software program |
| LCD Display |
(1) Green LCD alphanumeric; adjustable backlight; 2 lines x 20 characters per line; displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system information |
| SOFTKEYS |
(4) Pushbuttons for activation of LCD driven functions and passcode entry |
| MENU |
(1) Pushbutton, steps menu back one level |
| Λ, V |
(2) Pushbuttons, for scrolling up or down through the menu and adjusting menu parameters |
| ENTER |
(1) Pushbutton, executes the highlighted menu or value |
| VOLUME |
(1) Continuous turn rotary encoder, adjusts menu parameters;
Defaults to Program audio volume control |
| MUTE |
(1) Pushbutton and red LED, mutes the Program audio output |
| INFO |
(1) Pushbutton and red LED;
Selects INFO mode to view AV and device info |
| ROUTE |
(1) Pushbutton and red LED;
Selects ROUTE mode to allow routing changes |
| VIEW |
(1) Pushbutton and red LED;
Selects VIEW mode to view current routing |
| INPUT 1 – 8 |
(8) Pushbuttons and red LEDs;
Selects the corresponding video input for routing |
| OUTPUT 1 – 2, PROG, AUX 1 – 2 |
(5) Pushbuttons and red LEDs;
Selects the corresponding video or audio output for routing |
| SPEAKER OUTPUT (rear) |
(1) 3‑position slide switch;
Selects amplifier output configuration |
| DM INPUT 7 (rear) |
(2) LEDs, (1) green and (1) amber;
Green LED indicates DM link status, amber LED indicates video and HDCP signal presence |
| DM OUTPUT 2 (rear) |
(2) LEDs, (1) green and (1) amber;
Green LED indicates DM link status, amber LED indicates video signal presence |
| CONTENT LAN IN 8 (rear) |
(2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| CONTROL SUBNET (rear) |
(2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| LAN (rear) |
(2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| Power |
| Main Power |
6A @ 100‑240VAC, 50/60 Hz |
| Power Consumption |
75 W typical;
60 W idle |
| Available Cresnet Power |
10 W |
| Power over DM (PoDM) |
IEEE 802.3at compliant PoDM+ PSE (Power Sourcing Equipment), each DM INPUT/OUTPUT port supplies up to 30 W to power one PoDM (Class 0‑3) or PoDM+ (Class 4) PD (Powered Device)8 |
| Power over HDBaseT |
IEEE 802.3at PoE+ compliant PSE, each DM INPUT/OUTPUT port supplies up to 30 W to power one HDBaseT PoE or PoE+ PD8 |
| Power over Ethernet (PoE) |
IEEE 802.3at compliant PoE PSE (Power Sourcing Equipment), the CONTROL SUBNET port supplies up to 15.4 W to power one PoE (Class 0‑3) PD (Powered Device)8 |
| PoDM Power Supply |
Compatible with model PW‑5430DUS (sold separately) |
| Environmental |
| Temperature |
41° to 104° F (5° to 40° C) |
| Humidity |
10% to 90% RH (non‑condensing) |
| Heat Dissipation |
256 BTU/hr typical;
205 BTU/hr idle |
| Enclosure |
| Chassis |
Metal, fan‑cooled, vented sides |
| Front Panel |
Metal, black finish with polycarbonate label overlay |
| Mounting |
Freestanding or 3 RU 19 in. rack‑mountable (adhesive feet and rack ears included) |
| Dimensions |
| Height |
5.20 in. (133 mm) without feet |
| Width |
17.28 in. (439 mm);
19.00 in. (483 mm) with rack ears |
| Depth |
15.75 in. (400 mm) |
| Weight |
| 15.5 lb (7.1 kg) |
| Compliance |
| UL Listed for US & Canada, IC, CE, FCC Part 15 Class A digital device |
| Maximum DM 8G+ Cable Lengths |
| 1080p60 Full HD |
330 ft
(100 m) |
330 ft
(100 m) |
330 ft
(100 m) |
| 1920x1200 WUXGA |
| 1600x1200 UXGA |
| 2048x1080 DCI 2K |
| 2560x1440 WQHD |
230 ft
(70 m) |
165 ft
(50 m) |
| 2560x1600 WQXGA |
| 3840x2160 4K UHD |
| 4096x2160 DCI 4K |
|