Wired Ethernet Module with 4 Digital Inputs
A compact, wired I/O module featuring the Crestron IFE micro form factor. Provides four digital inputs for easy device expansion within a system. Conveniently powered via PoE and fits almost anywhere to suit a variety of installations.
The Crestron® CEN-IO-DIGIN-104 is a compact and cost-effective wired I/O module designed to easily expand the available digital inputs within a commercial or residential system. A small form factor allows the CEN-IO-DIGIN-104 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The four onboard digital inputs enable direct integration with all kinds of third-party equipment.
The CEN-IO-DIGIN-104 communicates to the local network using the available LAN connection, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN-IO-DIGIN-104 via PoE (Power over Ethernet) or a Crestron control system, eliminating the need for a local power supply or extra wiring.
Security Protocols:
The CEN-IO-DIGIN-104 supports the following security protocols to help protect against service interruptions and malicious intrusions:
- TLS 1.2 for web server and control system connections
- Local Authentication for console, web server, and control system connections
- SSL for console connections
Power over Ethernet
Using PoE technology, the CEN-IO-DIGIN-104 gets its operating power directly through the LAN wiring. PoE eliminates the need for a local power supply or any dedicated power wiring. A PoE Injector (PWE-4803RU) simply connects in line with the LAN cable at any convenient location. Crestron PoE switches (CEN-SW-POE-5 or CEN-SWPOE-16) may also be used to provide a total networking solution with built-in PoE. All PoE injectors and switches are sold separately.
Integrator Friendly Enclosure
The CEN-IO-DIGIN-104 features the Crestron IFE form factor, a compact "Integrator Friendly Enclosure" design that fits almost anywhere and enables a variety of installation options. Its shape allows multiple CEN-IO and other IFE compliant devices to be stacked together. Using the included mounting bracket, it can be fastened to any flat surface or snapped onto a standard DIN rail. Rack mount and pole mount kits are also available.[1]
Key Features
- Compact, cost-effective wired Ethernet I/O module
- Provides four digital inputs
- Installer setup via Crestron Toolbox™ software or web browser
- Supports TLS 1.2, Local Authentication, and SSL security protocols
- PoE (Power over Ethernet) network powered
- Compact, stackable "IFE micro" form factor
- Surface or DIN rail mountable
- Available rack mount and pole mount options[1]
| Communications |
| Ethernet |
100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, SSL, TLS, IEEE 802.3af and 802.3at Type 1 compliant |
| Connectors |
| LAN PoE |
(1) 8-pin RJ45 connector, female;
100Base-TX Ethernet port;
PoE (Power over Ethernet) PD (Powered Device) port |
| DIGITAL IN |
(1) 5-pin 3.5 mm detachable terminal block;
Comprises (4) digital inputs (referenced to GND);
Input Voltage Range: 0–24 Volts DC;
Logic Threshold: ≥2.0 Volts DC 0/low, ≤1.1 Volt DC 1/high;
Input Impedance: 2.2k Ohms pulled up to 5 Volts |
| G |
(1) 4-40 screw;
Chassis ground lug |
| Controls & Indicators |
| PWR |
(1) Bicolor green/amber LED, indicates that power is present, amber indicates that the device is booting and not yet ready to operate, green indicates that device is ready to operate |
| ONLINE |
(1) Green LED, indicates that the device is connected to a Crestron control system via Ethernet |
| SETUP |
(1) Red LED and (1) recessed pushbutton for Ethernet setup, LED indicates that the SETUP pushbutton has been pressed (times out automatically) [2] |
| LAN PoE |
(2) Bicolor LEDs, green LED indicates 100Mbps Ethernet link status, amber LED indicates Ethernet activity |
| Power |
| PoE (Power over Ethernet) |
IEEE 802.3at Type 1 (802.af compatible) Class 0 (12.95 Watts) PoE Powered Device |
| Power Consumption |
1.8 Watts |
| Environmental |
| Temperature |
41 to 104 °F (5 to 40 °C) |
| Humidity |
10% to 90% RH (noncondensing) |
| Heat Dissipation |
7 BTU/hr |
| Construction |
| Enclosure |
IFE micro form factor, black and blue plastic |
| Mounting |
Freestanding, stackable, surface mount, or 35 mm DIN EN 60715 rail mount;
Occupies 8 DIN module spaces (144 mm);
Surface/DIN rail mounting bracket included, optional rack mount and pole kits sold separately |
| Dimensions |
| Height |
1.35 in. (34 mm), 1.77 in. (45 mm) with bracket |
| Width |
5.04 in. (128 mm), 5.36 in. (136 mm) with bracket |
| Depth |
2.86 in. (73 mm), 3.33 in. (85 mm) with bracket |
| Weight |
| 6.4 oz (180 g) |
| Compliance |
| UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.