| Audio |
| Input Signal Types |
HDMI, DM NAX, AES67 audio-over-IP |
| Output Signal Types |
HDMI (multichannel pass-through), DM NAX (2-channel downmix), AES67 audio-over-IP (2-channel downmix) |
| Digital Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos |
| Video |
| Input Signal Types |
HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, 8K30 4:4:4 12-bit, and 4K120 4:4:4 12-bit support |
| Output Signal Types |
HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, 8K30 4:4:4 12-bit, and 4K120 4:4:4 12-bit support |
| Copy Protection |
HDCP 2.3 |
| Connectors |
| Ethernet 1 |
(1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port;
PoE+ PD (powered device) port, IEEE 802.3at Type 2 PoE+ Class 4 (25.5 W) compliant |
| Ethernet 2 |
(1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port |
| HDMI IN |
(1) HDMI Type A connector, female;
HDMI digital video/audio input |
| HDMI OUT |
(1) HDMI Type A connector, female;
HDMI digital video/audio output, pass-through from HDMI IN;
eARC audio return support |
| COM |
(1) 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support |
| IR |
(1) 2-pin 3.5 mm detachable terminal block;
IR output up to 1.1 MHz;
1-way serial TTL (0-5 V) up to 19200 baud |
| RELAY |
(1) 4‑pin 3.5 mm detachable terminal blocks;
Comprises (2) normally open, isolated relays;
Rated 1A, 30VAC/VDC;
MOV arc suppression across contacts |
| G |
(1) 6-32 screw;
Chassis ground lug |
| IN |
(1) 2-pin 3.5 mm detachable terminal block;
Programmable digital input;
Input Voltage Range: 0-24VDC, referenced to GND;
Logic Threshold: 2.5VDC nominal with 1V hysteresis band;
Pull-up Resistor: 2.2k Ω |
| Communications |
| Ethernet |
For control, and/or console, 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP |
| RS-232 |
2-way device control and monitoring up to 115.2k baud with hardware and software handshaking via control system |
| IR |
1-way device control via infrared up to 1.1 MHz or serial TTL (0-5V) up to 19.2k baud via control system |
| HDMI |
HDCP 2.3, EDID |
| Controls and Indicators |
| PWR |
(1) Green/amber bicolor LED;
Amber indicates unit is powering up/loading firmware;
Green indicates unit is fully powered and ready for use |
| HDMI IN |
(1) Green LED, indicates sync detection at the HDMI input |
| HDMI OUT |
(1) Green LED, indicates video signal transmission at the HDMI output |
| Ethernet 1 |
Left amber LED indicates 1000 Mb link status;
Left green LED indicates 100 Mb link status;
Flashing right amber LED indicates Ethernet activity |
| Ethernet 2 |
Left amber LED indicates 1000 Mb link status;
Left green LED indicates 100 Mb link status;
Flashing right amber LED indicates Ethernet activity |
| RESET |
(1) Push button: Used for factory reset procedures;
(1) LED, illuminates red when the button is pressed, flashes red when reset has been initiated |
| Power |
| PoE+ |
IEEE 802.3at Type 2 Class 4 (25.5 W) compliant;
Compatible with Crestron DM-PSU-ULTRA-MIDSPAN, PoE+ compliant Ethernet switch, or third-party IEEE 802.3at compliant PSE |
| Power Consumption |
14 W maximum |
| Environmental |
| Temperature |
32° to 104° F (0° to 40° C) |
| Humidity |
10% to 90% RH (non‑condensing) |
| Construction |
| Chassis |
Metal, black finish, vented sides |
| Mounting |
Surface-mountable or attachable to a single rack rail |
| Dimensions |
| Height |
5.03 in. (128 mm) |
| Width |
8.36 in. (213 mm) |
| Depth |
1.12 in. (29 mm) |
| Weight |
| 1.82 lb (0.83 kg) |
| Compliance |
|
Regulatory Model: M202116001
Intertek® Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
|