USB-EXT-2-REMOTE

USB over Category Cable Extender, Remote

Extends any USB 1.1 or 2.0 device up to 330 ft (100 m) point-to-point over one CAT5e (or better) unshielded twisted pair cable.

The Crestron® USB over Category Cable Extenders  (USB‑EXT‑2‑LOCAL and USB‑EXT‑2‑REMOTE) deliver reliable, high‑speed USB signal extension for USB 1.1 and 2.0 devices in a conference room, classroom, auditorium, command center, medical facility, public space, or residence. Without requiring any special configuration or drivers, the USB extenders enable wire runs up to 330 ft (100 m) over a single CAT5e (or better) unshielded twisted-pair (UTP) cable. The USB extenders support most USB device types and are plug‑and‑play compatible with computers running Windows®, macOS®, and Linux® operating systems.

Two types of USB extenders are available:

  • USB‑EXT-2‑REMOTE - Provides connectivity for up to two USB devices (keyboards, whiteboards, mobile devices, etc.) at one location
  • USB‑EXT-2‑LOCAL - Provides connectivity for a single USB host (computer, media server, codec, etc.)


Linking the two extenders requires one run of CAT5e unshielded twisted-pair cable.2 Both extenders are powered by a single 100-240 VAC power supply, which can be connected at either end to an AC power receptacle.3 The USB‑EXT‑2‑LOCAL and USB‑EXT‑2‑REMOTE are compatible with the USB over Category Cable Extender Wall Plates (USB‑EXT‑2‑LOCAL‑1G and USB‑EXT‑2‑REMOTE‑1G).

Note: The USB‑EXT-2‑LOCAL and USB‑EXT-2‑REMOTE are simple point-to-point USB signal extenders. They do not switch or route USB signals, and do not connect to a network. For KVM and other applications routing USB signals over an Ethernet network, please refer to the USB over Category Cable Extenders (USB‑NX2‑LOCAL‑1G and USB‑NX2‑REMOTE‑1G) or the USB over Ethernet Extenders with Routing (USB‑EXT‑DM‑LOCAL and USB‑EXT‑DM‑REMOTE).2

 
Key Features
  • Provide reliable, high-speed USB signal extension for most USB 1.1 or 2.0 devices1
  • Compatible with Crestron® USB over Category Cable Extender Wall Plates (USB‑EXT‑2‑LOCAL‑1G and USB‑EXT‑2‑REMOTE‑1G)
  • Extend USB signals up to 330 ft (100 m) over CAT5e (or better) twisted-pair cable2
  • 100-240 VAC power supply (included)
  • Enable transparent point-to-point USB extension without any configuration or programming
  • Plug-and-play compatible with most types of USB 1.1 and 2.0 devices and hosts1
  • No drivers required with Windows®, macOS®, or Linux® operating systems1
  • Transport USB over CAT5e at speeds up to 480 Mbps
  • Mass Storage Acceleration maximizes USB 2.0 bulk transfer speeds
  • Expandable using up to 4 USB hubs (not included)
  • USB‑EXT‑2-REMOTE provides 2 USB Type A ports
  1. The USB extender is engineered to deliver maximum compatibility with the widest possible range of devices. Crestron does not guarantee that all USB devices or hosts are compatible with the USB extender. Certain USB devices may require additional driver installation if not directly supported by the computer’s operating system.
  2. For the Link connection between the Local and Remote extenders, as a minimum, use high quality, solid core CAT5e (or better) unshielded twisted pair (UTP) cable. If connecting either extender through a wall jack, a stranded patch cord may be used. The maximum aggregate cable length is 330 ft (100 m) between units. The minimum cable length is 6 ft (1.8 m). Do not connect the Link ports to an Ethernet LAN or any other network or device, including the  USB‑EXT‑DM‑REMOTE, USB‑EXT‑DM‑LOCAL, USB‑NX2‑REMOTE‑1G, USB‑NX2‑LOCAL‑1G.
  3. The power supply must be connected to either the Local or Remote extender, not both. Power is passed to the secondary extender via the Link connection.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. macOS is either a trademark or registered trademark of Apple, Inc. in the United States and/or other countries. Extreme USB is either a trademark or registered trademark of Icron Technologies Corporation in the United States and/or other countries. Linux is either a trademark or a registered trademark of Linus Torvalds in the United States and/or other countries. Windows is either a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.

 
Powered by Translations.com GlobalLink Web SoftwarePowered by GlobalLink Web
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C