Communications |
|
Link |
USB extension up to 100 m (330 ft) over solid-core CAT5e (or better) unshielded twisted pair (UTP) cable [1] |
|
USB Device Support |
USB 1.1 and 2.0 compatible including mass storage and isochronous devices [2] |
|
USB Hub Support |
Any signal chain may include up to 4 USB hubs plus one USB-EXT-2 system [2] |
|
Maximum USB Devices |
30 USB devices, or 4 USB hubs with 26 USB devices |
|
Host Computer OS Support |
Windows, macOS, Linux |
|
USB Throughput |
USB 2.0 up to 480 Mbps;
USB 1.1 up to 12 Mbps |
Connectors – Local Extender |
|
24V 1A |
(1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input (power pack included) [3] |
|
Link |
(1) 8-pin RJ45 connector, female;
Connects to Link port on the Remote Extender [1] |
|
USB |
(1) USB Type B connector, female (USB B to A cable included);
USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc. |
|
Config (front) |
(For factory use only) |
Connectors – Remote Extender |
|
24V 1A |
(1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input (power pack included) [3] |
|
Link |
(1) 8-pin RJ45 connector, female;
Connects to Link port on the Local Extender [1] |
|
Config (front) |
(For factory use only) |
|
USB (front) |
(2) USB Type A connectors, female;
USB 2.0 host ports for connection of USB mice, keyboards, whiteboards, game controllers, cameras, audio devices, mobile devices, printers, flash drives, hard drives, hubs, and other USB devices [2];
Available USB Power: 1 Amp maximum per port, 1.5 Amps maximum total |
Indicators – Local Extender |
|
Mode |
(1) Recessed pushbutton (for factory use only) |
|
Power |
(1) Blue LED, indicates operating power is supplied via the local power pack or via the Link connection [3] |
|
Link |
(1) Green LED, indicates a valid Link connection to the Remote Extender |
|
Host |
(1) Green LED, indicates a valid connection to the USB host |
|
Activity |
(1) Amber LED, indicates data activity on the Link interface |
Indicators – Remote Extender |
|
Power |
(1) Blue LED, indicates operating power is supplied via the local power pack or via the Link connection [3] |
|
Link |
(1) Green LED, indicates a valid Link connection to the Local Extender |
|
Host |
(1) Green LED, indicates a valid connection to the USB host at the Local Extender |
|
Activity |
(1) Amber LED, indicates data activity on the Link interface |
|
Mode (rear) |
(1) Recessed pushbutton (for factory use only) |
Power |
|
Power Pack (included) [3] |
Input: 100-240 Volts AC, 50/60 Hz;
Output: 1 Amp @ 24 Volts DC |
|
Available USB Power |
Supplies 1 Amp maximum per each of two USB Type A ports, 1.5 Amps maximum total |
Environmental |
|
Temperature |
32° to 122° F (0° to 50° C) |
|
Humidity |
20% to 80% RH (non-condensing) |
Construction (Typical per Unit) |
|
Housing |
Metal, black finish, adhesive rubber feet |
|
Mounting |
Includes four slots for wire ties or other third-party mounting hardware |
Dimensions (Typical per Unit) |
|
Height |
1.03 in (26 mm) without feet |
|
Width |
2.96 in (75 mm) |
|
Depth |
3.43 in (87 mm) |
Compliance |
|
CE, IC, FCC Part 15 Class B digital device |