This page is only available in English

Produkte

    Seiten

        Take a look at #CrestronNow: Update on Lead Times - Learn More

        SIW-100

        Room Availability Status Indicator, Wall Mount

        Mounts to the wall outside a meeting room to provide indication of the room’s availability. Also suitable for any application requiring a wall mount status indicator.

        With just a glance down the hallway, the SIW-100 status indicator provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The clear acrylic lens glows bright green or red to indicate room availability. The complete assembly mounts to the wall over a single-gang electrical box or plaster ring.

        Room Availability Status
        For room scheduling applications, the SIW-100 simply connects via USB to a Crestron TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen. No special programming or configuration is required. The indicator color is controlled by the room scheduling application, which runs on the touch screen and syncs with Crestron Fusion® or another room scheduling service. The indicator illuminates green when the room is available and red when the room is occupied.[1]

        Custom RGB Colors
        For custom applications, the SIW-100 can be integrated with a Crestron control system and programmed to illuminate in a wide variety of colors. Its RGB LEDs can be controlled in 10% increments per color. When powered by USB, any single color LED can be used at full brightness, while if connected via Cresnet two color LEDs can be used at full brightness simultaneously. Three color mixing is possible when powered by Cresnet if each LED is limited to 70%. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired. Control system integration can be accomplished through a USB connection to a TSW-770(-GV) or TSW-1070(-GV) series touch screen, or through a Cresnet® connection to the control system.[2]

        Simple Installation
        Installing the SIW-100 is simple. It mounts to the wall over a standard 1-gang electrical box or plaster ring. Power and communications are supplied by a single USB or Cresnet wire. A six foot (1.83 meter) USB cable is included, which connects to the touch screen mounted below. Alternately, a Cresnet cable (sold separately) can be run to a control system up to 3000 feet (914 meters) away. Cresnet allows for daisy-chaining multiple status indicators using a single cable.[1,2]

        Mullion Mounting Option
        When a suitable wall surface is not available, the SIW-100 can be mounted to the mullion of an interior glass wall, window, or partition using the optional SSW-MUMK Mullion Mount Kit (sold separately). The same kit may also be adhered directly to the glass or any other smooth surface.

         
        Key Features
        • Provides highly-visible indication of room availability
        • Reveals every free meeting room at a glance down the hallway
        • Stylish wall mount design with clear acrylic lens
        • Clearly visible at 50 feet or 15 meters
        • Out-of-the-box functionality when used with a TSS-770, TSS-1070, TSW-770(-GV), or TSW-1070(-GV) series touch screen [1]
        • Illuminates vivid green or red to indicate room availability status
        • Custom functionality possible when connected to a Crestron® control system [2]
        • Supports RGB color mixing via custom control system programming
        • Allows virtually any color illumination (except white)
        • Energy efficient at less than 2 Watts power consumption
        • Single-wire USB or Cresnet® connectivity [1,2]
        • Mounts to a single-gang electrical box or plaster ring
        • Mullion mounting kit available separately
        • Projects 2 inches (52 mm) from the wall
        1. The USB port and cable are exclusively for connection to a Crestron TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen. The TSS-1070 and TSW-1070(-GV) must be powered using PoE+ (IEEE 802.3at Type 2 Class 4).
        2. Control system integration can be accomplished through a USB connection to a TSW-770(-GV) or TSW-1070(-GV) series touch screen, or through a Cresnet connection to the control system. USB and Cresnet connectivity are mutually exclusive. When using USB, the touch screen must be addressable over Ethernet from the control system. Control system integration is not available when connected via USB to a TSS series touch screen.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        The specific patents that cover this and other Crestron products are listed online at https://www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and Crestron Fusion are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2019 Crestron Electronics, Inc.

         
        AVF Works With (2)
        Indicator
        Lens Material Acrylic
        Illumination Edgelit RGB LED
        Functionality Supports alternating red/green indication of room availability status when connected to a room scheduling touch screen via USB [1], supports custom RGB color mixing when connected to a control system [2]
        Communications
        USB USB 2.0 device for connection to a TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen [1]
        Cresnet Cresnet slave mode [2]
        Connectors
        CNET (1) 4-pin 3.5 mm detachable terminal block;
        Cresnet slave port [2]
        USB (1) Micro-USB Type B connector, female;
        USB 2.0 device port [1];
        6 ft (1.83 m) micro-B male to A male USB cable included
        Controls
        CNET ID (1) Pushbutton (behind bezel) for Cresnet TSID (touch-settable ID)
        Power
        USB 1.2 Watts @ 5 Volts USB power [1]
        Cresnet Power Usage 2 Watts @ 24 Volts DC
        Environmental
        Temperature 41° to 113° F (5° to 45° C)
        Humidity 10% to 90% RH (non-condensing)
        Heat Dissipation 4 BTU/hr on USB power;
        7 BTU/hr on Cresnet power
        Construction
        Composition Metal bracket with replaceable acrylic lens and magnetically-held gray plastic bezel
        Mounting Mounts to a 1-gang U.S. electrical box or plaster ring (optional mullion mount kit sold separately)
        Dimensions
        Height 6.41 in (163 mm)
        Width 2.79 in (71 mm)
        Depth 2.16 in (55 mm)
        Projects 2 in (52 mm) from the mounting surface
        Weight
        1.0 lb (454 g)
        Click here to search product certificates.
        1. The USB port and cable are exclusively for connection to a Crestron TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen. The TSS-1070 and TSW-1070(-GV) must be powered using PoE+ (IEEE 802.3at Type 2 Class 4).
        2. Control system integration can be accomplished through a USB connection to a TSW-770(-GV) or TSW-1070(-GV) series touch screen, or through a Cresnet connection to the control system. USB and Cresnet connectivity are mutually exclusive. When using USB, the touch screen must be addressable over Ethernet from the control system. Control system integration is not available when connected via USB to a TSS series touch screen.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        The specific patents that cover this and other Crestron products are listed online at https://www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and Crestron Fusion are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2019 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.
        Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink