Horizon™ In-Wall 0-10 V Dimmer with infiNET EX® Wireless Communication, 120 VAC, Almond
The HZ‑DIMLVEX is a Horizon™ in‑wall 0‑10 V dimmer that controls ballasts and drivers. The device also has an integrated switch to cut load power. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.
Faceplate Sold Separately
The HZ‑DIMLVEX is a Horizon™ in‑wall 0‑10 V dimmer that controls ballasts and drivers. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.
NOTE: Faceplates are not included. Refer to the HZ‑FP‑G series faceplates for more information.
Supporting up to five buttons, the HZ‑DIMLVEX is configurable for a variety of applications. Because the dimmer is attached to the Crestron® network, it can function as a keypad to trigger remote actions.
Up to four devices may be installed side‑by‑side in a multigang electrical box with a compatible Horizon faceplate (HZ‑FP‑G series).1 All buttons in a multigang arrangement align to form one continuous control surface.
infiNET EX Communications
infiNET EX wireless technology provides two‑way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.2
The HZ‑DIMLVEX communicates with a control system via a CEN‑GWEXER1 or newer infiNET EX Wireless Gateway. Up to 100 infiNET EX devices may coexist on a wireless network.
Field-Replaceable Button Caps
The preinstalled rocker button cap on the HZ‑DIMLVEX is field replaceable, allowing for engravable multi‑button configurations.
Multicolor Backlit Button Engraving
Horizon button caps are laser engravable to identify each button's function. RGB LED backlights illuminate the engraved labels and can be adjusted for custom color backlighting. A built‑in ambient light sensor enables auto‑dimming of the backlight brightness according to day and night mode presets.
Each button's backlight provides feedback by changing color, intensity, or both. The backlight can also flash to show that an action is being performed.
Horizon device faceplates (sold separately) are customizable for any décor. Color‑matched top and bottom trim pieces may be swapped easily after installation with custom trim fabricated from solid materials such as wood, metal, marble, engineered stone, or Corian® solid surface. Contact a Crestron representative, or refer to Crestron True Blue Support Online Help Answer ID: 1000140, to obtain specifications and CADs for the fabrication of custom trim. Paintable trim is also available separately.
Note: The faceplate trim is attached magnetically, which may inhibit use in locations where tampering may occur.
- 0‑10 V dimming control
- Integrated switch to cut load power
- Single‑gang U.S. wall box installation
- Requires neutral wire connection
- Gangable up to four across using Crestron® Horizon™ device compatible multi‑gang faceplates (HZ‑FP‑G series, sold separately)
- Robust infiNET EX® wireless communication
- Preinstalled large rocker button
- Configurable with up to five field‑replaceable buttons
- Custom backlit laser‑etched engravable buttons
- Multicolor RGB LED backlighting
- Auto‑dimming day/night backlight modes
- Local button for load control without programming
- Fully programmable via a Crestron control system
- Crestron Home™ OS 3 compatible
||0‑10 VDC Ballasts, LED Drivers
No minimum load
|Dim Control Output
||0‑10 VDC 60 mA sink/source
|120 VAC, 50/60 Hz;
Requires neutral wire connection
(1) large rocker button preinstalled;
Configurable with combinations of HZ‑BTN‑RKR1, HZ‑BTN‑RKR3, HZ‑BTN‑RKR5, or HZ‑BTN‑1 in blank or engraved models 1
(1) Hidden pushbutton;
Located behind faceplate's top trim piece;
Configures the LED backlight and calibrates the light sensor
|Preset Fade Time
||1 second (default), software adjustable
|LED Indicator and Light Sensor
||(5) Color‑adjustable LEDs;
Provides button backlighting
||Photosensor with adjustable sensitivity;
Detects the ambient room light level to activate day or night mode
NOTE: Light sensor performance may be affected by obstructions placed below the keypad.
||infiNET EX® 2‑way RF, 2.4 GHz ISM Channels 11‑26 (2400 to 2483.5 MHz), default channel 15;
IEEE 802.15.4 compliant
||150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);
Subject to site-specific conditions and individual device capabilities 2
||Requires a CEN‑GWEXER or newer
infiNET EX gateway 1
||(1) 14‑12 AWG flying lead, black, load output (wire nut included)
||(1) 14‑12 AWG flying lead, black, load power input (wire nut included)
||(1) 14‑12 AWG flying lead, white, neutral (wire nut included)
||(1) 14‑12 AWG flying lead, red, remote (wire nut included)
||(1) 14‑12 AWG flying lead, green, ground (wire nut included)
||(1) 14‑12 AWG flying lead, purple (wire nut included)
||(1) 14‑12 AWG flying lead, gray (wire nut included)
||32° to 86° F (0° to 30° C)
||10% to 90% RH (noncondensing)
||Mounts in a 1‑gang U.S. electrical box or plaster ring (not included);
3.5 in. (26 mm) electrical box depth recommended;
Gangable up to four units
||Requires an HZ‑FP‑G Horizon faceplate with mounting bracket (sold separately)
||4.13 in. (105 mm)
||1.80 in. (46 mm)
||1.75 in. (45 mm) overall, extends 0.41 in.
(11 mm) from wall surface when installed
|7.2 oz (204 g)
|FCC, UL, IC
to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.